Equipment used to reduce and settle the pressure of an input gas which run with carbon dioxide, nitrogen and carbon-nitrogen. Pressure reducers can work with input pressures up to 300 bar and settle the output pressure up to 0,2 bar.
The high pressure valve of ODL reducers is a single block with a brass body which contains an holding pin in stainless steel and a PTFE gasket; the safety valves, which are integrated into the body of the reducer, are fixed calibrated and lead-covered.
The output pressure value can be pre-set and lead-covered or adjusted by the user up to a maximum value.
Pressure reducers can be equipped with input connections which are compatible with any kind of bottle connections with or without flexible high pressure tubes.
Likewise output pressure can be customized according to customer's needs. ODL pressure reducers can be supplied with or without gauges both for input and output pressure. Upon request, they can also be provided with plates for gauge protection and /or for wall fixing.
Each pattern can be set as primary, secondary, double stage (reducer and pre-reducer) pressure reducer and can be mounted as a set up to five bodies maximum.

SK and ISPESL approvedCertification SK 215.21

  • Pressure reducer SA
    SAPressure reducer in nickel-coated brass suitable for medium-large tapping systems. Junctions ¼" Gas female. technical details get back
  • Pressure reducer SB
    SBPressure reducer in nickel-coated brass suitable for medium-large tapping systems. Junctions ¼" Gas female. technical details get back
  • Pressure reducer SG
    SGPressure reducer in nickel-coated brass suitable for high gas quantity supply without production of ice thanks to the high volume of the pressure lower chamber. Junctions ¼" Gas female. technical details get back
  • Pressure reducer SM
    SMPressure reducer in nickel-coated brass suitable for medium-large tapping systems. Junctions 1/8" Gas female. technical details get back
  • Pressure reducer SP
    SPPressure reducer in nickel-coated brass and thermoplastic material suitable for medium-large tapping systems. Junctions 1/8" Gas female. technical details get back
  • Pressure reducer SN
    SNPressure reducer in nickel-coated brass suitable for small tapping systems. Junctions 1/8" Gas female. technical details get back
  • Pressure reducer ST
    STPressure reducer for CO2 in nickel-coated brass and thermoplastic material with automatic pressure regulation system according to temperature. Regulations values as per the following schemes. Junctions ¼ " Gas female. technical details get back
  • Pressure reducer SA-3334
    SA-3334Primary pressure reducer with double body in aluminium single block. Two independent reducers, connected to two bottles, supply a single use. When the bottle connected to the first reducer ends, an automatic valve systems starts the reducer connected to the second bottle up. Junctions ¼ " Gas. technical details get back